500PET
โพสต์เมื่อ : 10 ก.ย 2568 เวลา 6:52 น.
| Parameter (English) | Unit | 500PET | |||
| International size rating | 3725/500 | 4698/500 | |||
| INJECTION UNIT | A | B | A | B | |
| Injection volume (theoretical) | cm³ | 3012 | 3336 | 4111 | 4512 |
| Injection weight (PET) | g | 3673 | 4070 | 5015 | 5504 |
| Injection weight (PET) | oz | 129.6 | 143.6 | 176.9 | 194.2 |
| Injection rate (PET) | g/s | 1031 | 1143 | 1233 | 1353 |
| Screw diameter | mm | 95 | 100 | 105 | 110 |
| Injection pressure | MPa | 124 | 112 | 114 | 104 |
| Screw L/D ratio | 25:1 | 25:1 | |||
| Screw stroke | mm | 425 | 475 | ||
| Screw speed | r/min | 0-125 | 0-100 | ||
| CLAMPING UNIT | |||||
| Clamping force | kN | 5000 | |||
| Mold opening stroke | mm | 810 | |||
| Platen size | mm | 1128 x 1168 | |||
| Dist. between tie bars (H x V) | mm | 830 x 830 | |||
| Max daylight | mm | 1670 | |||
| Mold thickness (Min-Max) | mm | 300-860 | |||
| Ejector stroke | mm | 240 | |||
| Ejector tonnage | kN | 232 | |||
| POWER UNIT | |||||
| Hydraulic system pressure | MPa | 17.5 | |||
| Pump motor power | KW | 52.7 + 32.2 | 52.7 + 37 | ||
| Heater power | KW | 67 (A), 61 (B) | 56 (A), 50 (B) | ||
| Number of temp control zones | 7 | ||||
| OTHERS | |||||
| Oil tank | L | 725 | |||
| Machine dimension (L x W x H) | m | 9.6 x 2.3 x 2.7 | 9.2 x 2.3 x 2.7 | ||
| Machine weight | Ton | 21 | 23 | ||